BreadIntermediate

Sourdough Dutch Oven Bread

High hydration. Long cold retard. Crust that shatters.

Chad Waldman

Analytical Chemist · April 15, 2026

Sourdough Dutch Oven Bread
pH 3.5–4.5SAFE

Prep

45 min

Ferment

18–22 hrs

Total

24 hrs

Servings

1 loaf (900g)

Salt

2% baker's percentage

I've killed more sourdough loaves than I'd like to admit. Dense bricks. Gummy interiors. One time a crust so thick I legitimately considered it a weapon. The issue, every time, was the same: I wasn't measuring anything. I was going by feel, by vibe, by "it looks about right." That ended when I started treating my starter like a reagent instead of a pet.

Here's what I know now. Active sourdough starter has a pH between 3.5 and 4.5 when it's ready to use — that's the window where acetic and lactic acid bacteria have done their work but haven't starved out (PMID: 26287765). Below 3.5 and the gluten starts to degrade. Above 4.5 and you haven't fermented enough to develop flavor or structure. I measure my starter with the same pH meter I use for my lacto-ferments. It cost $18 on Amazon.

The dutch oven is not optional. Baking in a sealed vessel traps steam from the dough itself, creating what professional bakers call an "oven spring environment." The Maillard reaction happens at the surface while the interior stays moist long enough to finish gelatinizing the starches. Remove the lid at 450°F and you get radiant heat on a crust that's now set enough to brown without toughening. I have baked sourdough on a sheet pan exactly once. We don't talk about it.

For the long ferment: a 2020 study (PMID: 32783064) showed that extended cold fermentation at 39°F increased the concentration of flavor-active compounds — including acetate esters and organic acids — by nearly 40% compared to same-day loaves. The overnight cold retard isn't just convenient scheduling. It's chemistry. The rosemary variation at the end is optional but it turns a good loaf into a loaf people ask you about.

Sourdough Dutch Oven Bread video

Lab Session

Sourdough Dutch Oven Bread — Full Process

Instructions

  1. Step 1: Feed your starter
    1

    Feed your starter

    Feed your starter at a 1:5:5 ratio — 1 part starter, 5 parts flour, 5 parts water by weight. Leave at room temperature (72–75°F). It's ready when it has doubled, is domed on top, and the pH reads 3.8–4.2. This takes about 8–12 hours at room temp. If you use it too early (pH above 4.4) or too late (collapsed dome, pH below 3.5), your loaf will suffer for it.

    Chemist's note

    The float test is a folklore proxy. Use a pH meter. It's more reliable and doesn't waterlog your starter.

  2. Step 2: Autolyse
    2

    Autolyse

    Combine 450g flour and 300g of the water (hold back 30g). Mix until no dry flour remains — a rough, shaggy mass is fine. Cover and rest 45 minutes. Autolyse allows the flour to fully hydrate and gluten to begin forming without mechanical work. Enzymatic activity during this rest partially breaks down complex starches and makes the dough significantly more extensible when you go to fold it.

    Chemist's note

    Do not add salt or starter yet. Salt tightens gluten. Starter introduces acid. Both interfere with autolyse.

  3. Step 3: Mix in starter and salt
    3

    Mix in starter and salt

    Add 90g of peaked starter to the dough and work it in with your hands — squeeze it through, fold, squeeze, repeat until fully incorporated. Dissolve 9g salt in the reserved 30g water and add it to the dough. Mix until the dough feels cohesive. Cover and rest 30 minutes. Starting pH of the dough at this point is typically around 5.5–6.0.

    Chemist's note

    If your starter smells like nail polish remover (ethyl acetate) rather than yogurt and apples, it's over-fermented. Use it anyway and adjust your expectations downward.

  4. Step 4: Bulk ferment with stretch and folds
    4

    Bulk ferment with stretch and folds

    Bulk ferment at 75°F for 4–5 hours. During the first 2 hours, perform one set of stretch and folds every 30 minutes — 4 sets total. Each set: wet your hand, grab one side of the dough, stretch it up and fold it over to the opposite side, rotate the bowl 90 degrees and repeat 4 times. At the lamination fold (second set), this is where you add the rosemary if using. After the 4 fold sets, leave the dough undisturbed for the remaining bulk time. The dough is done when it has grown 50–75% and has a slightly domed surface with visible bubbles.

    Chemist's note

    Temperature matters more than time. At 78°F, bulk is done in 3.5 hours. At 70°F, it could take 6. Get a probe thermometer.

  5. Step 5: Shape and cold retard
    5

    Shape and cold retard

    Turn the dough onto an unfloured surface. Use a bench scraper and your hand to pull the dough toward you, creating tension on the surface — do this 8–10 times rotating the dough, until you have a taut round. Let it bench rest uncovered for 20 minutes. Then flip it, stretch it gently into a rectangle, fold the sides in, roll it toward you, and place it seam-side up in a well-floured banneton. Cover with plastic wrap and refrigerate for 12–16 hours at 39°F. Internal dough temperature during cold retard slows fermentation dramatically — you want the pH to drop gradually to around 3.8–4.0 by morning.

    Chemist's note

    Rice flour in the banneton doesn't absorb moisture. Bread flour does. Use rice flour if you've ever had a loaf stick.

  6. Step 6: Preheat and score
    6

    Preheat and score

    Place your dutch oven (lid on) in the cold oven, then set it to 500°F. Preheat for at least 1 hour — the cast iron needs time to fully thermalize. Do not skip this. Pull the dough straight from the fridge; baking cold dough is not a mistake, it's the method. Turn the cold dough out onto a parchment square. Score immediately with a lame at a 30–45 degree angle — one decisive cut, 4–5 inches long. Hesitation produces drag and torn crust.

    Chemist's note

    Wet the blade slightly before scoring. It glides cleaner. Also your fingers.

  7. Step 7: Bake
    7

    Bake

    Lower the oven to 500°F if it's not already there. Carefully remove the dutch oven, lift the lid, and lower the dough (on parchment) into the pot using the parchment as a sling. Replace the lid and bake 20 minutes — this is the steam phase, where oven spring happens and the crust sets. After 20 minutes, remove the lid, reduce to 450°F, and bake another 20–25 minutes until the crust is deep mahogany and the internal temperature reads 205–210°F. Rest on a wire rack for at least 1 hour before cutting. The interior continues to set as it cools — cutting early gives you gummy bread.

    Chemist's note

    If you don't have a thermometer, knock the bottom of the loaf. Hollow = done. Thud = put it back.

The Science

Sourdough Dutch Oven Bread

High hydration. Long cold retard. Crust that shatters.

45 min

Prep

18–22 hrs

Ferment

pH 3.5–4.5

Target

Ingredients

Equipment

  • Dutch oven (5–6 qt cast iron)
  • Kitchen scale (0.1g precision)
  • pH meter or pH strips
  • Bench scraper
  • Banneton proofing basket (9-inch round)
  • Lame or sharp razor blade
  • Instant-read thermometer

Quick Steps

Progress0/7